1/4 hp Rotary Vane Aeration System For Up To 2 Acres 12'-16' Deep

1/4 HP Rotary Vane Compressor Pond Aeration Systems rated at up to 18' depth. Includes 2 Dual Membrane Diffusers FREE SHIPPING*

Rotary Vane Aeration Systems

1 Year Warranty on Compressor 5 Year Warranty on Tubing and Diffusers

Build Your Own Custom Aeration System Below By Using Our Easy To Use Drop Down Options. More Tubing and Diffuser Options Here

$1,199.99

Availability: In stock

SKU

1/4hprotaryvanesystem

115v or 230v

Poly Aerator Tubing- Direct Bury (not recommended for use in pond)

Sinking Aerator Tubing

Deluxe Upgrades include Locking Cabinet, Pressure Gage, Cooling Fan and Electrical Box

Sound Proofing Upgrade

Equipment Pad 33" x 33"x 3"

Qty:

Details

Basic system includes compressor, valved outlet assembly with pressure relief valve, 200' of 1/2" Quick Sink Tubing, two dual membrane air diffusers, fittings and clamps

Tubing	200ft 1/2" Quick Sink or Poly
Horsepower	1/4 HP
Voltage	115/230v
Amps	5.0/2.5 amps
Maximum Air Flow (CFM)	4.5 cfm
Maximum Depth	18'
Instructions	PA Aeration Kit Instructions

These diffused air systems utilize a shore-mounted air compressor that pumps oxygen through a hose to a special diffuser lying on the pond bottom. Since the bottom of the pond is where the most oxygen is consumed, it is an ideal way to deliver oxygen to where it’s needed the most. As the bubbles rise out of the diffusers they create a “lifting” or boiling action, which creates considerable circulation throughout the pond. This circulation helps to prevent water stratification. The added oxygen, and equally important, the circulation created by these devices help to create a stable and productive ecosystem.
The amount of surface area an aeration system will effectively cover is greatly dependent on two factors – depth & shape. Long, narrow ponds may require multiple diffusers to property aerate the entire pond. Square, circular and oval ponds can usually be aerated from one central diffuser if one acre or less in size.

Deluxe Lockable Steel Cabinet - 16.5W x 22"L x 19"H

161/2" W x 22" L x 19" H - will hold all compressors up to RV100 or multiple smaller units with stainless steel lock to protect against vandalism
14 gauge galvanized steel with powder coat paint finish
Includes a compressor mounting base to keep compressor up off floor
Tapered lid - makes front wall shorter allowing easier access to compressor
Has six 11/4" knockouts for airlines and one knockout for incoming power
Cooling fan and electrical box installed. Electrical box has 1/2" conduit plumbed through floor for easy wiring.

Reviews

Write Your Own Review

Ask Product Question